TDSL--Firespec

home

about us

home

Specials & Fire Spec FD60, FD90, FD120 Rated Internal Doors

Contracts

Overview

Doorsets



			Audiospec

			Firespec

			Visicom

			plasdoor

			Panelspec


		TDSL Firespec™ are high performance 60, 90 and 120 minute fire-resisting doors and doorsets designed for internal use, particularly where the protection of not only life but expensive plant, equipment and important documentation is of paramount importance.

Fire Tests And Approvals TDSL has submitted TDSL Firespec Doorsets to Chiltern International Fire Ltd for testing to BS476:Part 22:1987 and received successful test performance ratings for a variety of exceptionally large door leaf sizes and configurations TDSL Firespec FD60 - test reports RF95107 and BTC11064F apply in single and double door configurations with over panels and glazed apertures TDSL Firespec FD90 - test reports RF96104 and RF00120 apply in single and double door configurations with over panels and glazed apertures TDSL Firespec FD120 - test report RF98041 applies in single and double door configurations with over panels and glazed apertures Note: separate data sheets detailing very extensive fields of application are available on request Third-Party Certification TDSL Firespec Doorsets have been granted the Q-Mark (BM TRADA Certification - certificate number 6/1509/011 applies)

^ back to top

Doors

Core: high performance timber-based composite with non-combustible sub facings encapsulated by high quality hardwood stiles and rails

Faces: mdf, plywood and chipboard offering the choice of decorative wood veneer, plastic laminate and quality stain/paint finishing

Lip pings: 10mm thick hardwood - bonded to vertical edges

Thicknesses:

TDSL Firespec FD60 - nominally 54mm

TDSL Firespec FD90 and FD120 - nominally 64mm

Availability:

TDSL Firespec FD60 - doors can be supplied separate or as complete doorsets with hardwood frames and ironmongery

TDSL Firespec FD90 and FD120 - doors are only supplied as part of complete doorsets with hardwood frames and ironmongery

Glazing: glazed apertures of unrestricted shape, single and multiple form and employing approved glasses and glazing systems are permitted within the scope of approvals (permitted glazing area must not exceed 0.60m2)

Door Frames

Made from a specially designed hardwood profile with a 12mm planted/rebated stop incorporated in single-acting configurations

TDSL Firespec FD60: hardwood of 640Kgm3 density (or greater) of minimum section 70 x 40mm after rebating and profiling

TDSL Firespec FD90: hardwood of 640Kgm3 density (or greater) of minimum section 90 x 45mm after rebating and profiling

TDSL Firespec FD120: hardwood of 650Kgm3 density (or greater) of


Pre-Finishing Wood veneers and plastic laminates of up to 2mm thick, stain and paint finishes and face-fixed timber moldings can be factory applied prior to delivery TDSL Firespec Doorsets have been tested and approved using a wide variety of ironmongery components. Approval is also in place for the provision of security wire ways through the door core It is recommended that items of ironmongery are factory fitted (where practicable) in order to ensure that the fire-resistance of the assembly is not compromised in any way. Note: a full list is available on request

^back to top

Supply

TDSL Firespec Doorsets are supplied fully factory assembled, pre-hung with standard hinges, ready for convenient on-site installation in accordance with approved specification

All double doorsets are supplied fully factory assembled with standard hinges installed and then disassembled for ease of transport and handling

In tumescent seals, in sections and types appropriate to the requirements of the specified configuration, are factory fitted

Storage and installation should be in accordance with good joinery practice

Note: separate 'qualifying and installation notes' are available on request